V

VEROQEN™ | Part Cost Calculator

Developed by Hongyi JIG Rapid Technologies

This tool is in a controlled beta. Please enter the access code you were given to continue.

VEROQEN TM Controlled Beta

Part Cost & SKU Calculator

Build each moulded part's cost from material, machine and cycle-time inputs, then group parts into a finished SKU/assembly with per-part quantities to get the total product cost. This tool is in controlled beta | treat results as an indicative, decision-support estimate.
1Build Parts
2Build SKU
3Summary & Report

Add a Part

1

Part Identity

What the part is called and what it's made of.
2

Weight & Cavity

Part weight, how many cavities make this part per shot, and the runner it carries.
3

Material Cost

Your own raw-material rate for this material | type it in manually, no preset list.
4

Estimate Helpers (optional | skip if you already know cycle time & tonnage)

Don't know the cycle time or machine size yet? Enter the part's wall thickness and projected size below and this suggests both | fully overridable.
View full Material Datasheet →
Suggested Cycle Time
| sec
Suggested Machine Tonnage
| T
Both are simplified engineering estimates (wall-thickness-squared cooling rule + projected-area × cavity-pressure clamp rule), typical uncertainty ±25% | always overridable, and the tonnage estimate does not check shot capacity, tie-bar spacing or platen fit.
5

Machine & Cycle Time

Pick a tonnage | the hourly rate fills in automatically, editable any time.
6

Rejection & Margin

Pre-filled house defaults, fully editable per part.
* required to add this part | Material, Part Weight, RM Rate and Cycle Time directly drive the cost.

Parts List

Part NameMaterialShot Wt (g)RM Cost/ShotMoulding Cost/ShotRejectionProfit+OHTotal/ShotCost/Part
No parts added yet | fill the form above and click "Add Part to List".

Assign Parts to this SKU

Part NameCost / PartQPS (Qty per Unit)QPS Weight (g)QPS Part Cost
SKU Total Cost₹0.00
Add parts in Step 1 first.

Summary

Total SKU Cost
₹0.00

This is an engineering cost estimate for benchmarking and planning | not an official quotation. Actual supplier quotations may vary based on final design, scope, commercial conditions and execution assumptions.

Already compared this estimate with a real quotation or outcome? Share it →

Part Cost & SKU Calculator | Reference

What this calculates, and who it's for

This tool estimates per-part injection-moulding cost from material, cycle time, machine rate, rejection and profit assumptions, then rolls multiple parts up into a full SKU or assembly cost | for toolmakers quoting parts, OEM procurement/cost-engineering teams checking a supplier's part price, and anyone comparing Make vs Buy options before an investment decision.

Required inputs

How the calculation works

Shot Weight = Part Weight × Cavitation + Runner (manual or % of part weight). RM Cost/Shot = Shot Weight ÷ 1000 × RM Rate. Moulding Cost/Shot = (Machine Hourly Rate × Cycle Time ÷ 3600) ÷ (Efficiency ÷ 100). Rejection and Profit are both added as a % of (RM + Moulding). Total/Shot ÷ Cavitation = Cost/Part. Multiple parts combine into a SKU total using quantity-per-set (QPS).

Full Methodology & Limitations →

What's included / not included

Worked example

FieldValue
Part Weight / RM Rate / Cycle100 g / ₹105/kg / 40 sec
RM Cost/Shot₹10.50
Moulding Cost/Shot₹4.63
Cost / Part (result)₹17.70

This is the tool's own default/baseline scenario (PP, single cavity, 2% rejection, 15% profit+overhead) | shown here as a worked illustration.

FAQ

Do I need to know the exact cycle time and tonnage?

No | use Estimate Helpers (wall thickness, projected length/width, material, optional MFI) to get a suggested cycle time and machine tonnage, then click "Use this" to fill them in. You can always override with your own numbers.

Can I enter runner weight as a percentage instead of grams?

Yes | toggle Runner Mode to "% of part weight" if you don't have an exact runner weight from your CAD/trial data.

How does the SKU roll-up work?

Add each part with its own Quantity Per Set (QPS) | the tool multiplies each part's Cost/Part by its QPS and sums them into one SKU total, useful for assemblies with multiple moulded components.

Related calculators

Mould Cost Calculator → ROI & Investment Calculator →

V
VEROQEN™
Manufacturing Decisions, Quantified.

Part Cost & SKU Report

Generated from your inputs on the Veroqen™ Part Cost Calculator. Figures are estimates for budgetary planning | see notes below.

PartMaterialWeight (g)CavitationCycle (s)RM/ShotMoulding/ShotRejectionProfit+OHCost/PartQPSQPS Cost
SKU Total Cost₹0.00
What this covers: Raw material, machine time (at the hourly rate and efficiency % shown), rejection % and profit+overhead % per part, exactly as listed in the table above | it does NOT include mould amortisation, direct labour, colour/masterbatch, secondary operations, packing, logistics or taxes. Notes: This is an engineering cost estimate for benchmarking and planning | not an official quotation. It is based on the inputs you entered at the time of generation. Actual supplier quotations may vary based on final design, scope, commercial conditions and execution assumptions. Hongyi JIG Rapid Technologies (operating as Veroqen™) is not liable for business decisions made solely on this tool's output.
VEROQEN™ · veroqen.com · Developed by Hongyi JIG Rapid Technologies